Pro Series – 2400 Battery Backup Sump Pump System

  • Automatically switches to battery power when AC fails, and Recharges automatically.
  • Monitors system conditions and alarms
  • The alarm can be silenced during a power outage
  • Displays the percentage of power remaining in the battery
  • Runs the pump weekly to test for proper operation
  • Can run directly on AC power
  • USB Data Port and Remote Terminals connect to external devices such as a Pro Series CONNECT Module, home automation systems, or other devices for remote notification
  • Designed for use with wet cell or maintenance-free batteries

PS-C33 Combination Backup and Primary Pumps

  • S3033 Primary – Cast Iron / Stainless Steel Construction
  • Activates the pump to exercise and extend the pump life
  • Pump run time is adjustable
  • Can accommodate two standby batteries to double the runtime
  • USB Data Port and Remote Terminal allow the unit to connect to one of many devices

PS-C22 Combination Backup and Primary Pumps

  • ST1033 Primary – Cast Iron / Stainless Steel Construction
  • Activates the pump to exercise and extend pump life
  • Primary pump run time is adjustable
  • Unique monitoring controller sounds an alarm if maintenance is needed
  • USB Data Port and Remote Terminal allow the unit to connect to one of many devices

PS-C11 Combination Pumps

  • Pre-assembled primary and backup sump pump for quick and easy installation
  • 2,770 GPH at 10 ft. lift (ST1033 Primary Pump)
  • 1,000 GPH at 10 ft. lift (PHCC-1000 Backup Pump)
  • Backup will assist the primary pump if excessive amounts of water are entering the sump pit.
  • A dual float switch provides complete redundancy for the backup pump

PHCC-2400

  • 2,400 GPH at 10 ft. lift
  • 12-volt DC sump pump with decades of proven reliability
  • Caged dual float switches for added reliability
  • Automatically switches to battery power when AC fails
  • Accommodates up to two B-2200 batteries for 100 hours of pumping (Based on 10% duty cycle. Run times may vary based on inflow of water.)

PHCC-1850

  • 1,850 GPH at 10 ft. lift
  • 12-volt DC sump pump with decades of proven reliability
  • Dual float switches for added reliability
  • Automatically switches to battery power when AC fails
  • Accommodates up to two B-2200 batteries for 100 hours of pumping (Based on 10% duty cycle. Run times may vary based on inflow of water.)

PHCC-1000

  • 1,000 GPH at 10 ft. lift
  • 12-volt DC sump pump with decades of proven reliability
  • Dual float switches for added reliability
  • Automatically switches to battery power when AC fails
  • Accommodates up to two B-2200 batteries for 100 hours of pumping (Based on 10% duty cycle. Run times may vary based on inflow of water.)

DVSA Pump Alternator

  • Prolongs pump life by alternating two primary pumps
  • New: Runs both pumps at the same time if extra capacity is needed
  • If one pump fails, the other pump will take over, and an alarm will sound
  • A flashing light will indicate which pump is failing
  • New: Includes (2) two caged dual float switches (DVSA-DF)
  • New: Detachable float switch wires for easy installation
  • Angled receptacles to accept a standard or right-angled pump plugs
  • New: Built-in circuit breakers for both pumps (15 total amps max.)

Dual Float with Enhanced Controller

  • Two micro reed-activated floats for added reliability
  • The protective cage prevents debris from interfering with floats
  • Vented, curved bottom prevents debris build-up under the float
  • The detachable float switch allows the wire to feed through the pit cover for easy installation and maintenance
  • Mounts to the discharge pipe with an included stainless steel hose clamp
  • Activation level is adjustable
  • Pump run time is adjustable
  • Monitors pump and power conditions and sounds an alarm when problems are detected.

DCIS-33V 1/3 HP Cast Iron Submersible Sump/Effluent Pump with Vertical Float Switch

  • 4,000 GPH (67 GPM) at 0 ft. lift; 3,200 GPH (53 GPM) at 10 ft. lift
  • 1/3 HP pump energy-efficient permanent split capacitor (PSC) motor
  • Cast iron construction
  • Premium pump construction includes: upper and lower sealed ball bearings for ultra-quiet operation, stainless steel fasteners for long life, carbon / ceramic seals plus 1 Buna-N-Seal, thermal protection, and 1-1/2 in. discharge
  • A cast iron vortex impeller can pass 1/2 in. solids
  • Removable strainer
  • 10 power cord
  • Monitors pump and power conditions and sounds an alarm when problems are detected.